PRESS
 
CONTACT
Screening and Washing Installations
SCREENING
AND WASHING INSTALATIONS

1. Screening unit (vibrate)
   - Optimum output capacity - from 90 to 300 t/h
   - Three screen fractions:0-5;5-20;20-30 and over screen material
   - water-pressure system 2000 liters/min
   - Electrical power: 15 kw
 
   
   
2. Washing unit
   - Rotary blade unit with continuous cycle
   - Productiveness 80-150 t / h.
   - Installed power 25 kW.
   - Filter with inlet 9 " pipe.
   - Duplex elevator buckets for optimize fit together and percolation in a sand.
   - Screw conveyors section for effective reduced in
the washing component.
   - Spillways with 40 meters filtering worm-pipe.
   - Dirigibled outfall for fix a stand to an exit material
on the export belt.
   - Six-point 3 " water-injector system for extra agitate in a suspension with capacity 3000 liters/min
   - Variants :
      * Electric or hydraillc operated
      * One or two entrance in a filter
      * Module or mobile
   - Dimensions : W 3500 ; L 7000; H 3500
   
   
3. Belt conveyor
   - 3 pcs - one per each fraction and outlet of the screens
   - Length - 10 m; width - 1,15; maximum working angle - 200
   - Gilled rubber conveyor belt
   - Power 11 kw
   
   
4. Base of the screening and washing plant
   - Semi-trailer with two axes, tires 8 - 295x 80 R 22,5
   - Chassis made of IP 330
   - Receiving bunker charged by a front charger
   - capacity 6 m3
   - vibrator facilitating the material draining away
   - type MVE 500/3, 10.27 kgcm,0.50 kw
  4.1 Charging band conveyor
   - L = 14600 mm
   - B = 1150 mm
   - a = 28°
   - motor reducer drive , type - TA 502
   - electrical value 15 kw
   
   
5. Operative unit, consisting of:
  5.1 Control cabin
   - insulation - heat insulating panels (sandwich)
   - 4 leveling support jacks
   - air-conditioner
  5.2 Control panel with power and operative unit
   
Price includes:
  > Transportation to the ground of the client
  > Assembling, commissioning and training the staff
  > 24 months complete guarantee on condition of complying with
  the technological requirements and maintenance afterwards.
 

© Copyright Technomash